DTS DTS-6 Dokumentacja Pobierz pdf (Strona 3)

Jumpstart, or “Real hams don’t read manuals!”

Ok, but at least read this one section before you transmit:

1. Attach the RF input jack (center connector, marked TX) to your transmitter or transceiver

with a 50 ohm coaxial jumper cable.

2. Attach your antennas to the other RF ports.

3. Connect a 12 volt power supply capable of providing 500 ma to the 2.5 x 5.5 mm

coaxial

power jack (center positive).

4. Press a front panel button to select the desired antenna.

Specifications

• Switches up to 1,500 watts of RF power (1000 watts on 6M)

• Six SO-239 antenna ports

• Automatic grounding with most modern transceivers (when

used with the DTS-6R)

• Remote operation from DTS-6R or your PC

• Requires 12 volts at 500 ma, 2.5 x 5.5 mm jack, center positive

IMPORTANT SAFETY WARNING

Never install antennas or transmission lines over or near

power lines. You can be seriously injured or killed if an

part

of the antenna, support or transmission line touches a power

line. Alwa

s follow this antenna safet

rule: the distance to

the nearest power line should be at least twice the len

th o

the lon

est antenna

transmission line or su

ort dimension.

1 2 3 4 5 6 7 8 ... 11 12

Brak uwag

DTS DTS-6 Dokumentacja Strona 3